Description
JDC Titanium Full Engine Bay Hardware Replacement Kit (Evo X)
Upgrade the appearance and performance of your vehicle with this high-quality engine bay hardware kit, specifically designed to replace rusty OEM hardware with beautiful CNC machined Gr5 titanium hardware. This kit includes everything you need to give your engine bay a sleek, modern look and improve overall performance.
With a total of 106 individual pieces, this kit is the most comprehensive titanium kit on the market. Each piece is made from high-grade titanium, which provides exceptional strength and durability while being ultra-lightweight.
What's included in the full kit?
Valve Cover Kit:
- (18) Custom Head Bolts with a Collar like the OEM Bolts
- (4) M6 Custom Head Bolts for Coils
- (2) M6 Custom Head Bolts for Fuel Rail Line
- (3) M6 Custom Head Bolts for Valve Cover Brackets
Headlight Kit:
- (4) M6 JDC Custom Head Bolts
- (4) JDC Custom Flush Fitting Washers
Fender Kit:
- (6) M6 JDC Custom Head Bolts
- (6) JDC Custom Flush Fitting Washers
ECU Area Kit:
- (10) M6 Custom Head Bolts
- (3) M6x Custom Head Bolts
- (4) M8 Custom Head Bolts
- (1) M8 Flange Nut
- (2) M6 Custom Head Bolts
Intake Manifold Area Kit:
- (17) M6 Custom Head Bolts
- (1) M6 Flange Nut
- (2) M8 Flange Bolts
- (2) M5 Custom Head Bolts
- (2) M5 Custom Washers
Power Steering Area Bolt Kit:
- (4) M8 Custom Head Bolts
- (1) M8 Flange Nut
- (6) M6 Custom Head Bolts
- (2) M5 Allen Head Bolts
- (2) M5 Custom Washers
Shipping times:
Perfection takes time, so expect an average of 5-7 business days for a kit with this many pieces to ship. Once the order has left our hands, delivery time will depend on the shipping service you select at checkout. We cannot guarantee delivery times will be accurate due to the possibility of carrier delays.
About our Titanium:
JDC titanium hardware is made of precision CNC machined 6AL-4V Grade 5 Titanium. They provide extremely high tensile strength, are corrosion resistant, all while being ultra-lightweight. Available in multiple color options. Each piece is hand polished before receiving our famous cold anodizing for beautiful, vibrant colors that will last for years to come!
For a color chart and information on our titanium products please click here.
Valve Cover Hardware Installation Instructions:
Important Notes:
- The recommended factory torque specs for the valve cover hardware is 48.5 +/- 4.5 INCH-POUNDS! Make sure to use a 4mm ALLEN KEY to torque the bolts and not a torx bit. Our Evo X Valve Cover Bolts have been tested with a torque wrench to withstand 14.5 ft/lbs (174 in/lbs.) before the head strips. If you are having an issue with stripping bolts, you are doing something wrong.
- Gloves are recommended during installation to keep oils off of the titanium. If you don't have a set of clean gloves, washing your hands before touching the titanium parts will help. After the installation, you can wipe down the hardware to bring back the shine using soapy water or Windex with a microfiber rag.
Step 1: Start by removing all the bolts from the valve cover except the bolts in holes 1 and 2 in the diagram below. These will help keep the valve cover centered while replacing the rest of the bolts. Insert the rest of the bolts and loosely hand-tighten them.
Step 2: Following the torque diagram below; torque all the bolts to 26.5 +/- 8.8 inch lbs. in the order shown. When you reach bolt 18, replace bolts 1 and 2 with the new bolts. Continue the torque sequence with bolt 3 to 48.5 +/- 4.5 inch lbs. Do not forget to do the final torque on bolts 1 and 2. If you ordered a basic kit, you can stop here. If you ordered the full kit, proceed to step 3.
Step 3: The 4 medium-sized bolts (M6x20mm) are for the coil packs. Remove the old bolts and replace them with the new titanium bolts. Hand-tight will be fine those these.
Step 4: Remove the 3 old bolts from the wire clips on top of the valve cover. This will require pinching the black clip and removing it from the bracket to get the 10mm socket on the bolt. Replace these with the smallest bolts (M6x12mm). Hand-tight is fine for these.
Step 5: Remove the two bolts from the top of the fuel rail and replace them with the small titanium bolts (M6x12mm). Hand-tight is fine for these as well.
Step 6: Take a step back and admire the beauty of a full titanium engine bay kit from JD Customs USA. Don't forget to take a few pictures and tag us @JD_Customs_USA! We usually repost installation pictures on our Instagram story! Thanks for your business and stay tuned for more Evo X parts and kits coming soon!
