JDC Stainless Steel Engine Bay Hardware Replacement Kit
Tired of your ugly rusted stock hardware? This kit will replace it all! This stainless steel kit is NOT a universal kit. This kit was designed specifically for the EVO 8/9. The factory bolts and nuts were measured to determine the proper size and length to be provided in the kit. Instructions can be found below or by scanning the QR code on the back of the product label.
(14) M6 Bolts & Washers: (Circled in Blue)
- Fenders
- Headlights
- Radiator Overflow Reservoir
- Front Bumper
(8) M8 Bolts: (Circled in Red)
- (2) 25mm Bolts (ACD Reservoir)
- (2) 25mm Bolts (Radiator Stay Brackets)
- (1) 25mm Bolt (A/C Line)
- (1) 25mm (Power Steering Line)
- (2) 25mm (Power Steering Reservoir)
- (8) Finishing Washers
Valve Cover: (Circled in Green)
- (13) 25mm Bolts (Inside & Outside of Valve Cover)
- (4) 16mm Bolts (Spark Plug Cover)
- (3) 12mm Bolts (Front Engine Lift Hook & Rear Wire Harness Brackets)
- (20) Washers (For Each Bolt)
Timing Belt Cover: (Circled in Purple)
- (4) M6x20mm Bolts & Washers
Fusebox: (Circled in Pink)
- (2) M6x14mm Bolts & Washers
